Mount the optics
Step 1: Mount the optics assembly
- Get the 2.5mm Ball-end Allen key ready
- Take the complete optics module and pass it between the top and middle plates of the main structure.
- Insert the exposed mounting screw on the optics module through the keyhole on the z-actuator.
Step 2: Adjust the optics assembly
- Insert the Allen key through the teardrop-shaped hole on the front of the z-actuator until it engages with the mounting screw.
- Slide the optics module up the keyhole.
- Tighten the screw with the Allen key to lock the optics.
- The optics module position can be changed later using the thumbwheel or mounting screw for different applications.
